1,10-Dichlorodecane CAS No.:2162-98-3

1,10-Dichlorodecane CAS No.:2162-98-3

1,10-Dichlorodecane Specification The CAS register number of 1,10-Dichlorodecane is 2162-98-3. It also can be called as Decane, 1,10-dichloro- and the IUPAC name about this chemical is 1,10-dichlorodecane. The molecular formula about this chemical is C10H20Cl2 and the molecular weight is 211.17....

Product Details

Name

1,10-Dichlorodecane

EINECS

218-489-6

CAS No.

2162-98-3

Density

0.976 g/cm3

Solubility


Melting Point

15.6 °C

Formula

C10H20Cl2

Boiling Point

284.3 °C at 760 mmHg

Molecular Weight

211.17

Flash Point

108.4 °C

Transport Information

UN 3082

Appearance

colourless liquid or white solid

Safety

37/39-26-61-60

Risk Codes

38-36/37/38-50/53

Molecular Structure

1.jpg

Hazard Symbols

3(001).jpgXi, 4(001).jpgN

Synonyms

NSC 9484;




1,10-Dichlorodecane Specification

The CAS register number of 1,10-Dichlorodecane is 2162-98-3. It also can be called as Decane, 1,10-dichloro- and the IUPAC name about this chemical is 1,10-dichlorodecane. The molecular formula about this chemical is C10H20Cl2 and the molecular weight is 211.17. It belongs to the following product categories which include Building blocks; Alpha,omega-Dichloroalkanes; Alpha,omega-Bifunctional Alkanes; Monofunctional & Alpha,omega-Bifunctional Alkanes; Alkyl; Halogenated Hydrocarbons; Organic Building Blocks and so on. This chemical can be obtained by thionyl chloride chlorination of Sebacic alcohol.


Physical properties about 1,10-Dichlorodecane are: (1)ACD/LogP: 5.43; (2)# of Rule of 5 Violations: 1; (3)ACD/LogD (pH 5.5): 5.43; (4)ACD/LogD (pH 7.4): 5.43; (5)ACD/BCF (pH 5.5): 7935.91; (6)ACD/BCF (pH 7.4): 7935.91; (7)ACD/KOC (pH 5.5): 21523.95; (8)ACD/KOC (pH 7.4): 21523.95; (9)#Freely Rotating Bonds: 9; (10)Index of Refraction: 1.449; (11)Molar Refractivity: 58.07 cm3; (12)Molar Volume: 216.3 cm3; (13)Polarizability: 23.02x10-24cm3; (14)Surface Tension: 30.1 dyne/cm; (15)Enthalpy of Vaporization: 50.23 kJ/mol; (16)Boiling Point: 284.3 °C at 760 mmHg; (17)Vapour Pressure: 0.00515 mmHg at 25°C.

Preparation: this chemical can be prepared by 1,10-Bis-chlorformyloxy-decan. This reaction will need reagent DMF. The reaction temperature is 130 - 140 ℃. The yield is about 97%.

1.jpg

Uses of 1,10-Dichlorodecane: it can be used to produce 1-chloro-10-phenoxydecane with phenol at heating. This reaction  will need reagent tetrabutylammonium hydrogen sulfate, 3 M aq. NaOH with reaction time of 16 hours. The yield is about 69%.

2.jpg


When you are using this chemical, please be cautious about it as the following:

This chemical is very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. It is irritating to eyes, respiratory system and skin. This material and its container must be disposed of as hazardous waste. If you want to use it, please avoid release to the environment and refer to special instructions / safety data sheets. When you are using it, wear suitable gloves and eye/face protection. After contact with skin, please wash immediately with plenty of soap-suds. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

You can still convert the following datas into molecular structure:

(1)SMILES: ClCCCCCCCCCCCl

(2)InChI: InChI=1/C10H20Cl2/c11-9-7-5-3-1-2-4-6-8-10-12/h1-10H2

(3)InChIKey: RBBNTRDPSVZESY-UHFFFAOYAX 

(4)Std. InChI: InChI=1S/C10H20Cl2/c11-9-7-5-3-1-2-4-6-8-10-12/h1-10H2

(5)Std. InChIKey: RBBNTRDPSVZESY-UHFFFAOYSA-N


Inquiry